» » » »

Steel Shelving Unit Parts List

STANDARD DUTY (S) STEEL SHELVING CONFIGURATION:

Basic Units measuring no wider than 48" and no deeper than 24" are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(8) Double Rivet Beams (QDR) full perimeter top and bottom of unit.
(2) Single Rivet Beams (QSR) for each additional middle shelf.
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic Units measuring over 48" wide and 36" or deeper are constructed of the following components:

(4) Angle Posts (QP) with footplates attached.
(8) Double Rivet Beams (QDR) full perimeter on top and bottom shelves.
(4) Single Rivet Beams (QSR) for each additional middle shelf.
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic Units measuring no wider than 48" and no deeper than 24" are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(8) Double Rivet Beams (QDR) full perimeter top and bottom of unit.
(2) Double Rivet Low Profile Beams (QDRLP), left to right, for each additional middle shelf.
(2) Single Rivet Beams (SRB), front to back, for each additional middle shelf.
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic Units measuring over 48" wide and 36" or deeper are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(8) Double Rivet Beams (QDR) full perimeter top and bottom of unit.
(4) Double Rivet Low Profile Beams (QDRLP), left to right and front to back, for each additional middle shelf.
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic (H) Units measuring no wider than 48" and no deeper than 48" are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(4) Double Rivet Beams (QDR), left to right and front to back, for each level including top and bottom.
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic (HB) Units measuring over 48" wide and 48" or deeper are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(4) Double Rivet Beams (QDR), left to right and front to back, for each level including top and bottom.
(1) Beam Tie (BT) for each level
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic (W) Units measuring 69" x 16" and 69" x 32" are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(4) Double Rivet Beams (QDR), left to right and front to back, for each level including top and bottom.
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic (WB) Units measuring 72" or 96" wide by 24", 36" or 48" deep are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(4) Double Rivet Beams (QDR), left to right and front to back, for each level including top and bottom.
(1) Beam Tie (BT) for each level
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).

Basic (WBC) Units measuring 96" wide by 24", 36" or 48" deep are constructed of the following components:

(4) Angle Posts (QP) with 2" x 3/16" welded footplates attached.
(2) Double Rivet Channel Beams (QDRC), left to right , for each level including top and bottom.
(2) Double River Beams (QDR), front to back, for each level including top and bottom.
(1) Beam Tie (BT) for each level
(1) Piece of shelving material for each shelf (top and bottom are counted as 1 shelf each).