Causes of Pallet Rack Damage
Rack damage typically comes from one of a few sources:
- Faulty installation or setup
- Overloading racks beyond their rated capacity
- Accidental impact from a forklift or other equipment
Identify damaged pallet rack, determine the right repair solution, and restore your system with minimal disruption to your operation.
Pallet rack repair addresses damage that’s affecting a rack’s structural performance, whether that’s a bent beam, a dented upright, or a full section that’s out of alignment. Weakened or damaged racking can spill or drop product suddenly if it collapses, putting both inventory and personnel at risk.
A typical repair involves an inspection of the damage and a cost estimate, followed by securing the affected section with lift equipment. Damaged components are then cut away and replaced with new sections before the lift equipment is removed.
Rack damage typically comes from one of a few sources:
A damaged pallet rack isn’t just an eyesore; it’s a structural risk to your product, your building, and your employees. Repairing damaged racking is usually safer and less expensive than replacing an entire system, but repair work should never be attempted without expert assessment and assistance. A rack system that looks stable can still be compromised in ways that aren’t obvious without a proper inspection.
Regular rack inspections can help identify damage before it affects the performance and safety of your storage system. Pay particular attention to areas where forklifts and other material handling equipment frequently operate.
Any rack that has been struck, is visibly damaged, or appears unstable should be evaluated promptly. Damaged areas may need to be unloaded or taken out of service until a qualified rack professional determines whether the components can remain in use, be repaired, or need replacement.
If you know your facility has damaged racking but aren’t sure how severe it is or what it will cost to fix, DACO’s free, no-obligation Preliminary Rack Repair Assessment gives you a clear answer. The assessment includes:
This is a genuinely useful maintenance tool for prioritizing critical repairs and building a repair schedule and budget over time. There’s no obligation, and everything you share with us stays confidential. No obligation. Complete clarity.
A comprehensive, detailed survey and repair plan is completed once you move forward with the project.
REQUEST YOUR FREE RACK REPAIR ASSESSMENT
More than five decades of pallet racking experience have given DACO an in-depth understanding of warehouse and industrial facilities throughout Washington, Oregon, Idaho, and Alaska. From seismic design requirements to permitting and installation logistics, regional considerations are built into the planning process from the beginning.
DACO provides comprehensive project support for facilities throughout the Pacific Northwest, including Portland, Clackamas, Seattle, Kent and Yakima, regardless of whether the project is in a major market or a more challenging remote location.
Beyond the Northwest, DACO has also successfully supported pallet rack projects throughout North America.
How do I know if my pallet rack needs repair?
Look for bent beams, tilted frames, dents, overloaded levels, or poor assembly. Any of these can signal structural damage that needs professional assessment before the rack is used further.
Is it safe to repair pallet racking myself?
Rack repair should follow an engineered, manufacturer-approved, or otherwise qualified repair procedure. Field welding, heating, straightening, drilling, or adding unverified parts can change capacity and should not be improvised.
DACO can repair your damaged pallet racking and provide the safety products you need to create a safe work environment. Don’t delay and risk a rack failure.
CONTACT A SOLUTIONS EXPERT | Call 877-764-0453