Material Handling & Packaging Solutions

CHS - Air Curtain

  • CHS Air Curtain
  • CHS Air Curtain
  • CHS Air Curtain
  • CHS Air Curtain
Click image to enlarge

NON STOCK ITEM - Ships from Greenville, PA 16125

The CHS Air Curtain is designed for use over customer entrance doors in high traffic retail buildings where customer comfort in important, to help protect them from the cold, heat, dust and insects of everyday life.  By blowing an controlled stream of air down across the door, the air curtain keeps indoor air in and outdoor air out and to help improve customer comfort and satisfaction, employee productivity and maintain sanitation levels.

These commercial industrial doors are designed for maximum mounting heights of up to 11" for environmental  separation and come in (12) sizes from 36" to 12" long.

Construction - Stainless Steel Casing

Recommended Maximum Mounting Height - 11 ft. Environmental Separation

Options Available - Hot Water Heat, Steam Heat

Other air curtains aim the discharge of each blower down, resulting in dead spots wherever there are spaces between the blowers.

A CHS air curtain aims the air from the blowers towards the back of the air curtain, where it fills a plenum and is then forced out evenly across the length of the air curtain.

CHS OPTIONS AVAILABLE:

  • Steam and Hot Water Heat

CHS RECOMMENDED OPENINGS:

  • Retail Businesses

CHS AIR CURTAIN FEATURES:

  • Made of 18 gauge 304, corrosion resistant, stainless steel.
  • Heavy duty 1/2 hp, 1075 rpm direct drive motor for longer life.
  • Multiple speed motor(s) to control air volume down from maximum speed.
  • Provides uniform velocity across the entire length of the discharge area.
  • Top and bottom access panels allow service to motors and blowers without lowering the entire unit or removing the coils.
  • Galvanized centrifugal fan, double inlet design with zinc plated hubs.
  • Protective inlet screen.
  • Discharge nozzle designed so that air leaves on a 6 degree plane.
  • Creates a positive air seal with directional air foil vane.
  • Front air intake - optional top air intake available.
  • Wall or top mount.
  • Optional 1" recleanable filter.
  • ETL Listed.
  • Made in the USA.

  • Model: CHS
  • Construction: Stainless Steel Casing
  • Description: Customer Entrance
  • Max Mount Height Environmental (Ft): 11
  • Manufacturer: Powered Aire
  • Units per Package: 1
Quantity:
 

NON STOCK ITEM - Ships from Greenville, PA 16125

The CHS Air Curtain is designed for use over customer entrance doors in high traffic retail buildings where customer comfort in important, to help protect them from the cold, heat, dust and insects of everyday life.  By blowing an controlled stream of air down across the door, the air curtain keeps indoor air in and outdoor air out and to help improve customer comfort and satisfaction, employee productivity and maintain sanitation levels.

These commercial industrial doors are designed for maximum mounting heights of up to 11" for environmental  separation and come in (12) sizes from 36" to 12" long.

Construction - Stainless Steel Casing

Recommended Maximum Mounting Height - 11 ft. Environmental Separation

Options Available - Hot Water Heat, Steam Heat

Other air curtains aim the discharge of each blower down, resulting in dead spots wherever there are spaces between the blowers.

A CHS air curtain aims the air from the blowers towards the back of the air curtain, where it fills a plenum and is then forced out evenly across the length of the air curtain.

CHS OPTIONS AVAILABLE:

  • Steam and Hot Water Heat

CHS RECOMMENDED OPENINGS:

  • Retail Businesses

CHS AIR CURTAIN FEATURES:

  • Made of 18 gauge 304, corrosion resistant, stainless steel.
  • Heavy duty 1/2 hp, 1075 rpm direct drive motor for longer life.
  • Multiple speed motor(s) to control air volume down from maximum speed.
  • Provides uniform velocity across the entire length of the discharge area.
  • Top and bottom access panels allow service to motors and blowers without lowering the entire unit or removing the coils.
  • Galvanized centrifugal fan, double inlet design with zinc plated hubs.
  • Protective inlet screen.
  • Discharge nozzle designed so that air leaves on a 6 degree plane.
  • Creates a positive air seal with directional air foil vane.
  • Front air intake - optional top air intake available.
  • Wall or top mount.
  • Optional 1" recleanable filter.
  • ETL Listed.
  • Made in the USA.

Construction - Stainless Steel Casing

Recommended Maximum Mounting Height - 11 ft. Environmental Separation

Options Available - Unheated, Electric Heat, Steam Heat, Hot Water Heat

There are currently no product reviews.
Ask a Question How can we assist you?
Required Fields *
First Name *
Last Name *
Email *
Phone *
Question *